Welcome to Modern Mopar Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


  • Content count

  • Joined

  • Last visited

  • Days Won


BJB last won the day on February 3 2016

BJB had the most liked content!


About BJB

  • Rank
    Senior Jack Wagon
  • Birthday 02/09/1963
  1. I used something like this... https://www.jerrybickel.com/batteries-and-components/dual-on-off-switch-kit---jbrc1026hd.html My battery was relocated to the passenger rear. This style of duel switch kit will allow you to shut off the battery and alternator with one action.
  2. Apparently is was just DynoSteve...
  3. SOLD!! Sent from my iPhone using Tapatalk
  4. Except for the intercooler... I need that for the new build. Custom CAI 2" direct drive cog setup Polished head unit - Rebuilt (2015) with new billet impeller (photo below, new style on right) (4) Pulleys 12 lb - 22lb boost range Blow off valve Aluminum piping - black powdercoat $6,500 (Available in 2 weeks) .
  5. "Like sucking on a cocktail straw but it's the olive is stuck on the end." Hahahahahahaha!!!!!!
  6. Sent from my iPhone using Tapatalk
  7. X2 on this place. I know they are a big Internet company but there is a brick and mortar location here in metro Detroit. They are open 7 days a week and have any appliance part you could ever think of.
  8. Bummer... Well that Free's up a King room at the host hotel. Anybody need a room??
  9. Hey Wes, thanks for the great launch shot!! Does Big Burtha have the left front of the ground??
  10. Is this a pre pay BBQ??
  11. Its more about the rubber compound degrading over time then thread depth.
  12. Fixed it for you. ;-)
  13. I have the ID 1000 injectors and have been using Q16 for many years with zero injector issues... Basic Specifications (ID 1000) Nominal Flow Rate – 1015cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F) Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi) Fuel Compatibility – Compatible With All Known Fuels Electrical Connector – USCAR I believe the ID 2000's have some fuel limitations. Basic Specifications (ID2000)Nominal Flow Rate – 2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F) Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane. Electrical Connector – Denso