Login to Account Create an Account
#1
Posted 08 March 2012 - 07:19 AM
Didn't get a chance last night to look too close to find one and thought the smart ones on here could save me some pain and suffering.
I think the instructions said it needed to be fused for at least 5 amp if I remember right. Don't really feel like putting a wire through the engine compartment if I don't have to.
And yes, I did do a search on here and didn't find anything.
" />
^^^ shit is broke ^^^
#2
Posted 08 March 2012 - 08:30 AM
#3
Posted 08 March 2012 - 08:36 AM
http://www.speedysga...nce_gauges.html
Best advice I can give you is get all the parts in advance and take your time. Put the extra effort to do a neat and sanitary job. Cirkit Boss is the way to go. Anyone can do this job. I took my time and did it over a few days. You are gonna love that Aeroforce gauge.
The thing I would do different on this mod would be to install "DUAL" Aeroforce gauges like HemiSam did. Aeroforce gauge gives you a wealth of information.
Good Luck man!
Stevo
11.55 @ 118.77 mph with a 1.61 60' June 14th 2014 London Motorsports Park


530 rwhp 458 trq
"Tooned by Mike @ OST"
#4
Posted 08 March 2012 - 09:11 AM
Jesus Alan... where you been? Lotsa info on this. PM Jay and have him email the schematic of the wiring. Watch the video a few times to understand how it's done.
http://www.speedysga...nce_gauges.html
Best advice I can give you is get all the parts in advance and take your time. Put the extra effort to do a neat and sanitary job. Cirkit Boss is the way to go. Anyone can do this job. I took my time and did it over a few days. You are gonna love that Aeroforce gauge.
The thing I would do different on this mod would be to install "DUAL" Aeroforce gauges like HemiSam did. Aeroforce gauge gives you a wealth of information.
Good Luck man!
Stevo
You have the same reading skills of Jim?
" />
^^^ shit is broke ^^^
#5
Posted 08 March 2012 - 09:22 AM
#6
Posted 08 March 2012 - 09:23 AM
Yep first post and last postYou have the same reading skills of Jim?
#7
Posted 08 March 2012 - 09:42 AM
GOOD PLACE FOR SWITCHED 12v IN THE CABIN????
Maybe I should be more clear...............I don't want to do a switch fucking thing, I only need one wire, to connect to power in the cabin....................
Power outlet like Sean said will probably work.
" />
^^^ shit is broke ^^^
#8
Posted 08 March 2012 - 09:48 AM
He didn't even read the first post or the fucking thread title.
GOOD PLACE FOR SWITCHED 12v IN THE CABIN????
Maybe I should be more clear...............I don't want to do a switch fucking thing, I only need one wire, to connect to power in the cabin....................
Power outlet like Sean said will probably work.
I've tried finding it on LX for you (bored at the airport right now), but I can't where some guy listed some issues with the power outlet. I do know that a lot of folks have gone that route.
#9
Posted 08 March 2012 - 09:50 AM
Ok... I will get the fuck outa this thread...
Stevo
11.55 @ 118.77 mph with a 1.61 60' June 14th 2014 London Motorsports Park


530 rwhp 458 trq
"Tooned by Mike @ OST"
#10
Posted 08 March 2012 - 10:06 AM
" />
^^^ shit is broke ^^^
#11
Posted 08 March 2012 - 10:12 AM
You might need a tune for those mods.
#12
Posted 08 March 2012 - 10:45 AM
Holy shit, it's 2009 all over again?
You might need a tune for those mods.
Just mount a little battery and draw off of it.
#13
Posted 08 March 2012 - 11:06 AM
J
#14
Posted 08 March 2012 - 11:15 AM
Probe the fuse box and find an unused fuse hole. It will have switchwed power to one side, and not the other with the key on. You can then put a 5amp fuse in it with a piggy back spayed terminal that wraps around the prong on the fuse (sorry, I don't know the official name of it or have a picture right now). Instant fused 5 amp connection ;-)
J
That is exactly how I wired my Sirius receiver in my old Durango. Never had an issue.
#15
Posted 08 March 2012 - 12:04 PM
Make sure you have a good grip on the frame....
Proud member of the Jerkoff Redneck Louisiana Idiot Chapter




#16
Posted 08 March 2012 - 12:08 PM

Chucks tongue after locating a switched 12 volt power source!
Stevo
11.55 @ 118.77 mph with a 1.61 60' June 14th 2014 London Motorsports Park


530 rwhp 458 trq
"Tooned by Mike @ OST"
#17
Posted 08 March 2012 - 12:44 PM
Joe



Many dreams come true and some have silver linings, I live for my dream and a pocketful of gold.
[email protected] Beech Bend 4/6/13
#18
Posted 08 March 2012 - 01:38 PM
#19
Posted 08 March 2012 - 02:05 PM
#20
Posted 08 March 2012 - 02:21 PM
Probe the fuse box and find an unused fuse hole. It will have switchwed power to one side, and not the other with the key on. You can then put a 5amp fuse in it with a piggy back spayed terminal that wraps around the prong on the fuse (sorry, I don't know the official name of it or have a picture right now). Instant fused 5 amp connection ;-) J
^^^ This.
1 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
-
Alexa (1)



Sign In
Create Account


View Garage
Back to top




