Welcome to Modern Mopar Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Group Buy: Solo Performance Charger/magnum/300 R/t 5.7L High Flow Converters

SOLO Performance Charger/Magnum/300 R/T 5.7L High Flow Cats

Application: 5.7 R/T Charger/Magnum/300

Years: 2006-2012

All of us at Solo Performance are proud to announce that we have our 2006-2012 Charger/Magnum/300 R/T 5.7L Hemi High Flow Converters tested and ready for sale. These are a full stainless steel converter/resonator assembly that has all stainless welds, O2 bungs, flanges, etc. It has been a long testing process to get these R/T cats right in both sound quality and the elimination of engine lights. We have several test cars out there that all have over 1000 miles on them with no engine light issues. Its so important to thoroughly test these High Flow Converters on multiple cars and we appreciate your interest and patience during this phase.

Solo is the only company that we know of that incorporates a resonator into a converter assembly when necessary. A by-product of the restrictive nature of the stock R/T converters is quietness. When we took the restriction away and opened up the converters with our Solo High Flows the noise became unbearable. We inserted a free flow Solo Mach-Resonator on each side and the exhaust note changed from “horrible” to a beautiful“8 Cylinder Symphony.” With the addition of the Solo High Flow Cats, your current exhaust note increases in volume by approximately 20% and the note deepens, richens, and becomes more full and rounded. The throttle response is greatly improved with the Solo Charger R/T Cats. No Dyno’s have been done on the Charger but many have been done on the R/T 5.7 Challengers with significant gains.

2006-2012 R/T 5.7 Hemi Charger/Magnum.300 Solo High Flow Converter Specs

  • 200 cell stainless steel spiral wound design. This design is long lasting, ultra-high flow, and completely stainless inside and out
  • Converters are far overrated for the car, at 6.0L per side. Thats 12.0L of cleaning ability.
  • Includes a special design stainless steel 3/8 thick front flange.
  • All pipes, O2 bungs, and welds are stainless steel.
  • For sound reasons we had to incorporate a free flow resonator behind the converter. With just the converter, the sound was horrible. With the addition of the resonator we now have great sound (about 15%-20% more noise overall) and performance.
  • These converters are not CARB certified for the R/T, but they do pass all emissions and keep the CEL light off. They are technically for off road use only.
  • Each converter assembly is about 4 feet long. It goes from the manifold to the first connection.
  • No CEL or engine lights to date!
  • Solo O2 extenders (supplied) are required in the rear O2 bungs.
  • 100% BOLT ON!

Retail Price: $774.88 including shipping to most of the U.S.A. and Canada.

GROUP BUY Details:

For every person that buys a set of these converters until the end of September 2012 there will be a 1% discount up to a maximum of 20% discount. You would pay the full price, the product will ship immediately, and a refund check will be issued to you once we hit the maximum 20% or at the end of the group buy.

To order, please contact:

Steve Mariano

Solo Performance Sales and Customer Service

[email protected]

516-655-9002 (7 days a week, until midnight EST)

Stainless Steel Performance Exhaust Systems, Exhaust Tips for Camaro, Ford F150, Dodge Challenger and more

PICTURES

Group Buy List:

1. Andy R.- PAID

2. Eddie G.- PAID

3.

4.

5.

6.

7.

8.

9.

10.

Share this post


Link to post
Share on other sites

We have HF cats in stock and ready to ship for the group buy...give us a call to get your order in at 516-655-9002:) Thanks and hope to speak with you all soon!

Steve

Share this post


Link to post
Share on other sites

What were the gains, and what's the weight difference from stock?

On the multiple dyno's that customers have done, we have seen anywhere from 11-18hp at the wheels and 10-19tq at the wheels. As far as the weight, they are about 5-7lbs. less than stock. Thanks:)

Share this post


Link to post
Share on other sites
HAPPY NEW YEAR from all of us at SOLO Performance!


All kits are in stock and ready to ship. Shipping is FREE to the continental US and some parts of Canada.


Call today to get your SOLO Performance catback exhaust kit and/or high flow converters at 516-655-9002. I take calls until midnight EST, 7 days a week. Thanks so much and have a happy and healthy New Year!


Steve

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now