Easy Street Speed & Kustoms Dyno @ Cf4

[Williams RT 70]

Once again this year Easy Street will be bringing their portable dynojet dyno to Challengerfest. There seemed to be a feeling participation would have been higher last year if it was not done on track day.

This year Easy Street is going to have it on Friday 12:00 to?

Also on Saturday at the track for those that arrive late Friday night and want to participate.

I want to thank the owner Tim Odom and the General Manager Greg Nolan, there is alot of time and expense doing this and it is more of a service for the event than for making money.

Easy Street is a great shop and takes very good care of my car, please give them a shot at any work you all maybe needing done. If you are in the Cincinnati area take a shop tour, it is a top notch facility. These guys are used to dealing with old hot rods and know how to treat a car right.

The cost to put your car on the dyno will be;
75.00 for 3 pulls with no wideband.
100.00 for 3 pulls with a wide band.


We would like to get a rough idea of who is wanting to do this? So post up if you are interested and which day and I will put you on the list.

http://essnk.com/

Check out their web site and face book page for some nice builds.

http://www.facebook.com/#!/Easystreetspeedkustoms?fref=ts


Easystreet Speed and Kustoms
701 Chamber Dr.
Milford, OH 45150
513-831-7550

Dyno Participants.

1. Fastrt09/Friday

2. Renfrick1

3. jettech104/ Friday

4. NTMID8R-R/T / Friday

5. Goehner /Friday

6. rwamser/ Friday

7. RT_6Speed/ pending

8. CaptRon/ pending

9. gtonram/ pending

10. Speedy

11. EODCM/Friday

12. Jungle Jim/ Saturday

13. Williamsrt/ Saturday

14. rdrdr90/Friday

15. 12TTyellowjacket/ Friday

16. Yellow Jacket/ Friday

17. HEMI2NV/ Friday

18. TA340

[ostmike 35]

CF4 just keeps getting better and better! Next year it will need to be a week long event.

Thanks Easy Street!

[ScapeGoat 126]

BOOYAH!!!!!

[Boatman 97]

I don't think has a high enough HP rating for me. I'm sure John can use it though.

All kidding aside great to have them again.

[Hemi57 51]

Sign me up.... I might even have my wideband installed, not that I need it for my car. But first I have to if get off my lazy butt and out to the shop.

[srt5939 159]

I don't think has a high enough HP rating for me. I'm sure John can use it though.

All kidding aside great to have them again.

yea "0" is probably to high for your car, better bring the one that runs

[Boatman 97]

I don't have one that runs Techo is in a pile at the moment.

[RT_6Speed 72]

I might do it again since I did a pre-blower on their dyno last year. Would be curious to see where it registers this year... thinking it might be a little over last years 350ish.

[CaptRon 19]

put me down for a maybe.

Question, What is it about a wideband that makes the price higher?

[Williams RT 70]

put me down for a maybe.

Question, What is it about a wideband that makes the price higher?

The time to do it, the set up work to read it and I am sure there is more I will ask them.

[CaptRon 19]

The time to do it, the set up work to read it and I am sure there is more I will ask them.

Just curious.

[NTMID8R-R/T 38]

This has possibilities.

[Speedy 247]

I'd encourage you guys to support Easy Street having this dyno at our event. It's a great way to correlate your actual RWHP for the times you run at the track and is a great tool to know where you can make improvements.

Thanks again Easy Street for making the trip.

[devildoghellcat 0]

sounds good i might give it a try, curious too

[Boatman 97]

Lets get back to John being slow....K

[Williams RT 70]

Lets get back to John being slow....K

[Renfrick1 83]

Ill roll again.

[Jarhead11 4]

This sounds like a good time to me!

[jettech104 27]

Put me down for Friday. It will be great to see the change after I get the tune from Mike at OST. Will be getting it before CF4. Do we have to prepay it?

[Williams RT 70]

Ill roll again.

Thanks

Put me down for Friday. It will be great to see the change after I get the tune from Mike at OST. Will be getting it before CF4. Do we have to prepay it?

Thanks, you still need to trade your car in on mine . Saw your post on DSM

[jettech104 27]

Thanks

Thanks, you still need to trade your car in on mine . Saw your post on DSM

I dont it would be a fair trade cause the Mistress has 95K miles on her!! Plus i'm broke !!

[Brandon@Easy Street 0]

First let me say hello to all you guys. I look forward to meeting you at the event. I will be there running the dyno during the event along with Jason.

put me down for a maybe.

Question, What is it about a wideband that makes the price higher?

The main thing for the added cost is the time added to install the sensor on the car, as well as a cheap insurance policy of sorts. We use a lab quality wideband and the replacement sensor runs about $480 once we get it shipped.

[Williams RT 70]

Well there you go. Thanks and welcome to the forum!

[Speedy 247]

Welcome to the forum guys. Look forward to seeing you guys again this year.

[NTMID8R-R/T 38]

thinking about doing this as I just want to know where my car is now. with the headers, exhaust, and tune.